1245 Maple Hill Court, Unit 8,
Newmarket, ON,
L3Y 9E8
+1(905) 898-5822

Cutout Ground Clamp

Part # : C6000785

Bronze clamp is used to ground the bottom hinge contact on cutouts used on distribution riser poles or where grounding is required. It fits these cutouts: Chance F2, F3, and C Cutouts; Westinghouse LDX, Southern States B-80; Southern States Series 63; Joslyn; S&C Type SX; McGraw-Edison LMO, and GE Durabute. Clamp can be installed with or without grounding cable to aid as a warning and possibly avoid accidental closing of cutout. Clamp’s drilled terminal accepts threaded-stud cable ferrules. It also accepts threaded L-Stud and T-Stud Terminals (3/4" diameter bronze) for use with conventional ground-clamp cable sets.

  •  Product Cutout Clamp
  •  Fault Current Rating ASTM Grade 3
  •  Material Bronze
  •  Terminal Type Drilled Terminal
  •  Handle Type Eyescrew
  •  Continuous Current 300 Amps
  •  Fault Current - 15 cycles 27,000 Amps
  •  Fault Current - 30 cycles 20,000 Amps
  •  Recommended Torque 250 in-lbs (339 N-M)
  •  Jumper Range - Maximum 2/0 Cable w/ Threaded Terminal
  •  Jumper Range - Minimum #2 Cable w/ Threaded Terminal
  •  Weight / Ea. 2.117 lbs

Images are representative of product. Product may not be exactly as shown.